DMX Input and Network

<< Click to Display Table of Contents >>

Navigation:  »No topics above this level«

DMX Input and Network

Previous pageReturn to chapter overviewNext page

Realizzer receives DMX-Data via: ArtNET, RealNet, USB-DMX. To activate a DMX-Input go to the Main-Menu > Input > DMX-Input and select an Input.


Network Settings

It can sometimes be necessary to change the used Ethernet Adapter for a selected Input Protocol. By default Realizzer always takes the first Adapter which is connected to a network. But for example, if you have a Wireless Adapter and a seperate Ethernet-LAN connection specialy for ArtNET you need to define the adapter to be used.


Go to Input > Network Settings...
















In this Dialog you can define the Network Adapter to use, for all supported Network protocols.